Ashly GQX-1502 User Manual download pdf

GQX-1502

The graphic equalizer shall be stereo (2-channels). Each

channel shall consist of 15 bands centered on standard

ISO frequencies at intervals of 2/3 octave and covering

a frequency range of 25Hz to 16kHz. Individual bands

shall be activated by linear slide faders with a 45mm

travel, metal actuator shafts and a tactile center detent.

The range of equalization per band shall be ±15dB. The

equalizer shall have a gain of unity with all sliders cen-

tered, and shall have a maximum in/out level of +22dBu.

Frequency response shall be ±.25dB 20Hz to20kHz. Hum

and noise shall be at least -95dBu and SMPTE inter-

modulation distortion or THD shall be less than .01% at

full output. Input impedance shall be 20k ohm balanced,

10k ohm unbalanced. Output impedance shall be 200

ohm servo-balanced. Inputs and outputs shall be active

(transformerless) balanced type on XLR ,1/4" phone

jacks and euroblock connections. Individual filters shall

be Wein-bridge type and connected in a summing circuit

optimized for minimum filter interaction and constant

bandwidth at any slider setting. Boost and cut charac-

teristics shall be fully symmetrical, with the filter being

electrically removed from the circuit in the center (flat)

position. Individual filters shall be accurate to within 3%

of indicated center frequency and shall be non-adjust-

able to insure long term accuracy. The equalizer shall

also include a 12dB per octave high pass filter at 40Hz,

equipped with a bypass switch. An LED indicator shall

show overload conditions. Input gain shall be adjustable

over -infinity to +6dB, and an overall EQ bypass switch

shall be included. The equalizer shall weigh 9.5 lbs net

and mount in a standard 19" rack using 2 spaces (3.5"

high). The power requirement shall be 100-240VAC, 50-

60Hz, 24W. The unit shall be an Ashly Audio GQX-1502.

ARCHITECTS SPECIFICATIONS

TECHNICAL NOTES & SPECIFICATIONS

GQX-1502 Graphic Equalizer

Features:

• Constant "Q" Design with Low Ripple and

Accurate Response Near the "Flat" Setting

• Precision Wein-bridge Filters for Accurate

Response and Low Distortion

• Switchable High Pass Filter

• High Quality Detented Metal-Shaft Fader

• Frequency Sliders Feature Center Detent

“Off”

• Balanced XLR, 1/4", and Barrier Strip

Inputs

• Servo-Balanced XLR, 1/4", and Barrier

Strip Outputs

• 5-Year Worry-Free Warranty

•

Safety/Compliance: cTUVus/CE, RoHS

• Rider Friendly

1 2

Summary of Contents

Page 1 - ARCHITECTS SPECIFICATIONS

GQX-1502The graphic equalizer shall be stereo (2-channels). Each channel shall consist of 15 bands centered on standard ISO frequencies at intervals o

Page 2 - RearPanelGQX-1502

Ashly offers a complete and comprehensive line of Analog and Digital Signal Processors, Power Amplifiers, Mixers, and Amplifier Input Options. Please

Ashly GQX-1502 User Manual

Browse online or download User Manual for Musical Instruments Ashly GQX-1502. Ashly GQX-1502 User Manual

Summary of Contents

More documents for Musical Instruments Ashly GQX-1502

Comments to this Manuals

Ashly GQX-1502 User Manual

Browse online or download User Manual for Musical Instruments Ashly GQX-1502. Ashly GQX-1502 User Manual

Summary of Contents

More documents for Musical Instruments Ashly GQX-1502

Comments to this Manuals

Related products and manuals for Musical Instruments Ashly GQX-1502