Ashly MX-508 Specifications download pdf (Page 5)

Operator Manual – MX-508 Mixer Page - 5

MX-508 Mixer

The MX-508 is a versatile rack-mountable mixer capable of supporting the following

applications:

 Small Sound Reinforcement

 Meeting/Board Room

 Location Recording

 Sub-mixing in a larger system

These applications are discussed in detail on Page 8.

Connectors & Cables

Your MX-508 is provided with three different connector types:

1. 1/4 inch stereo phone jacks (TRS)

2. Three pin XLR type connectors

3. RCA Connectors

When possible, balanced connections are recommend between all components in your

system, as this eliminates ground-loop induced hum and noise.

MX-508 Connector Polarities

Unbalanced Connections and Grounding

If you must use unbalanced connectors, the negative lead of the connector should be tied to

the ground lead. Using unbalanced connections could result in chassis ground-loop noise.

Altering the signal/chassis ground relationship in equipment connected to your unit may

eliminate the noise.

Safety Instructions – 3

Introduction - 4

MX-508 Mixer – 5

Connectors & Cables – 5

Grounding

Physical Description - 6

Installation – 7

Typical Applications - 8

Factory Configs - 8

Troubleshooting - 9

Dimensions - 9

Specifications - 10

Warranty - 11

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Ashly MX-508 Specifications Page 5