Ashly ne24.24M Specifications download pdf (Page 19)

Operating Manual - ne24.24M Matrix Processor

10.2 WR-1.5 Volume Control and Preset Recall

The WR-1.5 combines the level control capability

of the WR-1 and the preset recall capability of the WR-2. A

single potentiometer and a four position rotary switch offer

independent control of level and preset recall.

Remote Level Control - The WR-1.5 connects to the

"0-5V Remote Level Control" pins as shown for the WR-1. The

connected CV input must then be assigned to an input or output

channel remote level control function in Protea

Software.

Preset Recall - Up to four preset recall wires con-

nect to the ne24.24M "Logic Inputs" connector, along with the

preset recall ground wire. The terminal numbers 1-8 on the

ne24.24M correspond to the rst 8 preset memory locations

in that ne24.24M. Do not connect the WR-1.5 remote level

control ground to any other external grounds.

10.3 WR-2 Preset Recall

The WR-2 allows for remote selection of one of eight possible ne24.24M presets

via interlocking push-button switches. Each pushbutton switch connects to a terminal

block pin on the WR-2 circuit board, which in turn must be wired to the ne24.24M back

panel euroblock connector labeled “Logic Inputs (Preset Recall)”. Do not connect the

WR-2 remote level control ground to any other external grounds. The terminal numbers

1-8 correspond to the rst 8 Preset Memory locations in the ne24.24M. Pressing a button

will load the corresponding preset. A label template can be found on the Ashly website

for printing preset names for the WR-2 and sliding the paper behind the mylar overlay

windows.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

Ashly ne24.24M Specifications Page 19