Ashly XR2001 User Manual download pdf

XR-2001

The unit shall be a stereo three-way 24dB per octave electronic crossover

in a two rack space metal chassis. This same unit shall also be configurable

as a four-channel two-way electronic crossover. The unit shall have sepa-

rate front panel input level controls on all channels for interfacing with

broad range of nominal system levels. Unity gain operation must be

achievable by setting these controls at the U position. Each of the units

channels shall have independent, infinitely variable adjustment of

crossover frequency with controls located on the front panel. This control

shall provide a total range of 200:1 when used in conjunction with the

units adjacent RANGE switch. There shall be a RESPONSE control cali-

brated in decibels on each channel to adjust the dampng of that filter at

the crossover point, thus allowing variable system response adjustment to

specific site requirements. The unit shall have separate clip indicators to

monitor all internal amplifiers for any possible overload conditions. Each

channel of the crossover unit shall have a separate output level control

and mute switch located on the front panel. There shall be separate inputs

and outputs for each channel on 1/4 TRS phone jacks and XLR connec-

tors, any of which may be used balanced or unbalanced. In addition, there

shall also be an independent mono summed output labeled MONO LOW

OUT (on a separate 1/4 TRS jack and an XLR jack). The crossover must

be made in America and covered under a limited full Five Year warranty.

The shipping weight shall be ten pounds, with an overall depth of six

inches. The crossover shall be the Ashly model XR-2001, manufactured by

Ashly Audio Inc. of Rochester, New York. No other unit shall be accept-

able unless data submitted from an independent test laboratory verifies

that the above specifications are fully met or exceeded.

TECHNICAL NOTES & SPECIFICATIONS

ARCHITECTS SPECIFICATIONS

XR-2001 Stereo 3-Way/Mono 4/5-Way Crossover

Features:

5-Year Worry-Free Warranty

 24dB Per Octave Slopes

 Variable Filter Response Allows

Tuning-In Linkwitz-Riley or

Other Filter Performances

 Output Mute Switches

 XLR and 1/4 Inputs and

Outputs

 20Hz Third Order Hi-Pass Filter

 Extra Wide Tuning Range

 Peak Overload Warning Lights

 Tamper-Proof Security Covers

Optionally Available

1 2

Summary of Contents

Page 1 - ARCHITECTS SPECIFICATIONS

XR-2001The unit shall be a stereo three-way 24dB per octave electronic crossoverin a two rack space metal chassis. This same unit shall also be config

Page 2 - Rear Panel XR-2001

Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103, Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739Internet: http://www.as

Comments to this Manuals

No comments

Ashly XR2001 User Manual

Browse online or download User Manual for Receivers and Amplifiers Ashly XR2001. Ashly XR2001 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Ashly XR2001